Home Rain Barrel Installation Cost Calculator

Work out what a rain barrel setup costs and how much rainwater it can capture. Enter your roof area, the monthly rainfall, the barrels and the installation, then see the total cost, the water captured per year, the annual saving and the payback time.

The roof area that drains to the downspout feeding the barrel. One inch of rain on 1,000 sq ft gives about 623 gallons.

Your average monthly rainfall. Use your local climate average for a planning figure.

Barrels linked together share one downspout and add capacity. Most homes start with 1 or 2.

Most ready made barrels hold 40 to 60 gallons. A standard food grade drum holds 55 gallons.

Ready made barrels run $80 to $150, decorative ones $120 to $200, and a DIY drum $15 to $40 plus parts.

The kit that routes water from the downspout into the barrel and sends overflow back down. Kits run $25 to $40.

Cinder blocks or a platform to raise the barrel 12 to 24 inches, plus spigot, screen and overflow hose.

Enter 0 for DIY. A typical install takes 2 to 4 hours.

Enter 0 for DIY. Professional installation runs $45 to $200 an hour.

Your tap water cost. $0.01 a gallon equals $10 per 1,000 gallons. Check your water bill for your real rate.

Formula: total cost = barrels x price per barrel + diverter kit + base and fittings + installation labor, and water per inch of rain = roof area x 0.623 gallons, capped at total barrel capacity.

How to Use the Home Rain Barrel Installation Cost Calculator

A rain barrel is one of the cheapest home upgrades, but the barrel price alone hides the diverter, the base and the fittings. This calculator adds them all, then works out how much rainwater the setup can actually capture, so you can judge whether the saving is worth the spend.

  1. Enter the roof area in square feet that drains to the downspout feeding the barrel.
  2. Enter your average monthly rainfall in inches.
  3. Enter the number of barrels and the capacity of each one in gallons.
  4. Enter the price per barrel, the diverter kit cost and the base and fittings cost.
  5. Enter the installation hours and labor rate, or leave both at 0 for DIY, then enter your water cost per gallon and press Calculate, or press Enter. The total cost appears first and large, with the water captured, the annual saving and the payback time below.
A photo of a blue rain barrel beside a house downspout in a sunny backyard garden
Two 55 gallon barrels at $120 each with a $30 diverter and a $40 base cost $310 to install.

The Home Rain Barrel Installation Cost Formula

Total cost = barrels x price per barrel + diverter kit + base and fittings + installation labor. Installation labor = installation hours x labor rate per hour. Water per inch of rain = roof area x 0.623 gallons, capped at the total barrel capacity. Water per year = 12 x monthly rainfall x water per inch of rain. Annual saving = water per year x water cost per gallon, and payback time = total cost / annual saving.

The 0.623 factor is the standard conversion of 1 inch of rain over 1 sq ft to gallons, and McClelland Roofing 2026 confirms that 1 inch of rain on a 1,000 sq ft roof gives about 600 gallons. Angi, updated October 2026, puts most barrels at $0.50 to $4.00 per gallon and a 40 to 60 gallon barrel at about $140, with professional install at $45 to $200 an hour. Homeblesh puts a ready made barrel at $80 to $150, a diverter kit at $25 to $40 and a typical DIY total at $80 to $150. The yearly water figure assumes the barrel is emptied between rains, so each inch of rain can fill it again.

Worked Example: Two 55 Gallon Barrels on a 1,000 Sq Ft Roof

A homeowner has a 1,000 sq ft roof, 3 inches of rain a month, and buys 2 barrels of 55 gallons at $120 each, with a $30 diverter kit, a $40 base and DIY installation. Tap water costs $0.01 a gallon.

  1. Total capacity: 2 x 55 gallons = 110 gallons.
  2. Water per inch of rain: 1,000 sq ft x 0.623 = 623 gallons, capped at 110 gallons, so 110 gallons.
  3. Water per year: 12 x 3 inches x 110 gallons = 3,960 gallons.
  4. Total cost: 2 x $120 + $30 + $40 + $0 = $310.
  5. Annual saving: 3,960 gallons x $0.01 = $39.60. Payback: $310 / $39.60 = 7.83 years.

As a second check, take a 2,000 sq ft roof with 4 inches of rain a month and 4 barrels of 55 gallons at $150 each, a $40 diverter, a $120 base and 3 hours of labor at $75 an hour. The capacity is 220 gallons, the yearly water is 10,560 gallons, the total is $985 and the saving is $105.60 a year. The same steps work for any setup, so try your own numbers in the tool above.

A photo of a person watering garden plants with a hose connected to a rain barrel
The worked example captures 110 gallons per inch of rain, or 3,960 gallons a year.

What Changes the Cost and the Saving

Barrel size is the biggest limit on the saving, not the roof. A 1,000 sq ft roof sheds 623 gallons per inch of rain, while one 55 gallon barrel holds only 55, so most of the rain overflows. Adding a second barrel doubles the captured water, and linking barrels is the cheapest way to raise the saving. A slimline barrel holds 40 to 50 gallons and suits a tight side yard, while a 100 gallon barrel suits a large roof.

Water rates matter as much as rainfall. At $0.01 a gallon the worked example saves $39.60 a year, but at $0.02 it saves $79.20 and pays back in half the time. Many utilities offer rebates of $50 to $100 per barrel, which cut the payback further, so check your water utility before you buy. Our rainwater harvesting system cost calculator prices a larger tank system for homes that want more storage, and our pool volume calculator works out how much water a pool holds.

Installing a Rain Barrel in an Afternoon

Most homeowners finish the install in 2 to 4 hours. Pick a level spot near a downspout, raise the barrel 12 to 24 inches on cinder blocks or a platform so gravity gives the hose pressure, fit the spigot near the bottom and the overflow valve near the top, then connect the downspout with the diverter kit and direct the overflow away from the foundation.

Use a food grade drum if you build your own, never a drum that held chemicals. Keep a screen on the top to keep out leaves and mosquitoes, and drain the barrel before winter in cold climates so ice does not crack it. A first flush diverter, at $20 to $50, discards the first dirty flow from the roof and improves water quality for the garden.

Common Mistakes to Avoid

The most common mistake is buying a barrel that is too small for the roof, then wondering why it overflows in the first storm. One inch of rain on 1,000 sq ft is 623 gallons, so a single 55 gallon barrel fills fast. Size the barrels to the roof, or link two or more together.

The second mistake is putting the barrel flat on the ground. Without a raised base the spigot has no pressure and a watering can will not fit under it. The third mistake is forgetting the overflow. When the barrel is full, the diverter must send water back down the spout and away from the foundation, or the water will pool against the house wall.

A photo of two linked rain barrels on a raised wooden platform beside a house wall
Link barrels together to double the capacity, and raise them so the spigot has pressure.

Frequently asked questions

How much does rain barrel installation cost?

A DIY setup typically costs $80 to $150, and a ready made barrel with a diverter runs $100 to $300 installed. In the worked example, 2 barrels at $120 each with a $30 diverter and a $40 base costs $310 in total.

How much water does a rain barrel collect?

One inch of rain on a 1,000 sq ft roof gives about 623 gallons, but a barrel only holds what fits in it. In the worked example, 2 barrels of 55 gallons hold 110 gallons per inch of rain, which is 3,960 gallons a year at 3 inches a month, if the barrel is emptied between rains.

How much money does a rain barrel save?

Published guides put the saving at $35 to $100 a year on the water bill. In the worked example the saving is $39.60 a year at $0.01 a gallon, so the $310 setup pays back in 7.83 years. The saving grows with more barrels and higher water rates.

Do I need a plumber to install a rain barrel?

No, most homeowners finish the install in 2 to 4 hours with a drill, a hole saw and a screwdriver. A plumber or contractor is worth it only for a linked multi barrel system or a connection to existing plumbing, at $45 to $200 an hour.

Is rain barrel water safe to drink?

No. Rain barrel water is for garden and outdoor use, not drinking, unless it is filtered and treated. Rainwater has no chlorine, which plants like, but roof runoff can carry dirt and debris, so keep a screen on the barrel and clean it regularly.

This is an estimate for planning. Actual rain barrel prices come from local suppliers and installers and vary by barrel size, fittings and location. Rain barrel water is for garden and outdoor use, not drinking.

Start Calculating Now!

Discover the power of smart tools at KitQuarter.

Explore All Tools