Commercial Dishwasher Repair Cost Calculator

Work out what a commercial dishwasher repair will cost and whether the repair is worth it. Enter the diagnostic fee, the labor hours and rate, the parts cost and markup, and the price of a new unit, then see the total repair bill and a repair or replace verdict.

The fee for the visit that finds the fault. Commercial diagnostics run $135 to $299 and are usually billed separately.

How many hours the technician will work. Most dishwasher repairs take 1 to 3 hours.

The hourly rate for commercial kitchen equipment technicians, typically $85 to $150 an hour.

The cost of the parts before markup, from the quote or the parts supplier.

The markup the repair company adds to parts, usually 30 to 50%.

What a new equivalent dishwasher costs. Basic undercounter models start near $3,000.

Formula: labor cost = labor hours x labor rate per hour, parts with markup = parts cost x (1 + markup / 100), and total repair cost = diagnostic fee + labor cost + parts with markup. Repair is worth it when the total is below 50% of the replacement cost.

How to Use the Commercial Dishwasher Repair Cost Calculator

A broken commercial dishwasher stops the whole kitchen, so the quote you get on the phone is only useful if you can see how it is built up. This calculator adds the diagnostic fee, the labor and the parts with markup, then compares the total with half the price of a new unit, which is the standard repair or replace rule.

  1. Enter the diagnostic fee from the quote. If the fee is credited toward the repair, enter 0.
  2. Enter the labor hours and the labor rate per hour.
  3. Enter the parts cost before markup, and the markup percentage.
  4. Enter the replacement cost of a new equivalent dishwasher.
  5. Press Calculate, or press Enter. The total repair cost appears first and large, with the labor cost, the parts cost, the replace threshold and the verdict below.
A photo of a repair technician in work clothes fixing a stainless steel commercial dishwasher in a restaurant kitchen
A $135 diagnostic, 2 hours of labor at $120 and $234 of parts add up to a $609 repair.

The Commercial Dishwasher Repair Cost Formula

Labor cost = labor hours x labor rate per hour. Parts with markup = parts cost x (1 + markup / 100). Total repair cost = diagnostic fee + labor cost + parts with markup. Replace threshold = replacement cost x 50%. Repair is worth it when the total repair cost is below the replace threshold. The diagnostic fee is the part most people miss. On commercial jobs it is usually billed separately and not credited toward the repair, so it adds $135 or more to the bill even before any work starts. Published ranges put commercial dishwasher repairs at $200 to $700 for pump, spray arm or heating element work, with minor repairs at $150 to $350 and major repairs at $700 to $1,500.

Worked Example: A Pump That Will Not Drain

A restaurant has a door-type dishwasher that will not drain. The technician quotes a $135 diagnostic, 2 hours of labor at $120 an hour, and a $180 pump with a 30% parts markup. A new equivalent unit costs $4,000.

  1. Labor cost: 2 hours x $120 = $240.
  2. Parts with markup: $180 x 1.30 = $234.
  3. Total repair cost: $135 + $240 + $234 = $609.
  4. Replace threshold: $4,000 x 50% = $2,000.
  5. Verdict: repair, because $609 is well below $2,000.

As a second check, take a control board failure at $150 diagnostic, 2.5 hours at $130 an hour and a $520 board with 30% markup, on a $5,000 machine. The labor is $325, the parts are $676, the total is $1,151 and the threshold is $2,500, so repair is still worth it. The same steps work for any quote, so try your own numbers in the tool above.

A photo of commercial dishwasher pump and motor parts on a workbench in a kitchen
The worked example costs $234 for parts, $240 for labor and $135 for the diagnostic, for $609 in total.

What Drives the Repair Cost

The failed part drives the total. A door gasket or spray arm is cheap, a drain pump or wash pump is mid-range, and a control board is the expensive exception, at $230 to $388 for residential boards and more for commercial ones. Labor is the next driver. Commercial kitchen technicians charge $85 to $150 an hour, and a pump replacement takes 2 to 3 hours while a gasket takes about an hour. The diagnostic fee is fixed at $135 to $299 for commercial equipment, and it is billed whether or not you go ahead with the repair. Parts markup adds 30 to 50% to the parts cost, and it is higher on parts the company has to source the same day from a specialty distributor. Age matters too, because parts for older machines cost more and take longer to find. Our dishwasher installation cost calculator prices the other side of the same machine, what it costs to put a new dishwasher in.

Common Commercial Dishwasher Repairs

Not draining is the most common call, and it usually means the drain pump, the drain hose or a check valve, at $220 and up for a commercial unit. Not cleaning dishes properly usually means a clogged spray arm, a failed water inlet valve or a worn wash pump, at $130 and up. Leaking underneath usually means a door gasket or a pump seal, and a gasket job is one of the cheapest repairs. A machine that will not start usually means the door switch or the control board, and the board is the repair that pushes the bill toward the high end. Pump or motor failure on a door-type machine runs from $320, and a full control board replacement can run $700 to $1,500 with labor. If the quote covers more than one of these faults at once, ask for the parts listed separately, because one expensive part can hide inside a bundled price. Our small business commercial oven cost calculator shows the same buy-and-run math for another piece of commercial kitchen equipment.

Repair or Replace

The 50% rule is the standard test. If a single repair costs more than 50% of the cost of a new equivalent unit, get a replacement quote alongside the repair estimate before you commit. In the worked example the $609 repair is 15% of a $4,000 replacement, so repair is clearly right. The rule has two exceptions. If the unit is past its typical service life of about 10 years and has a history of repeat repairs, replace it even when one repair passes the test, because the next repair is already coming. And if the machine is under warranty, the repair may cost you nothing, so check the warranty before you pay a diagnostic fee. A new basic undercounter machine starts near $3,000 and a high-capacity flight-type machine runs $20,000 or more, so the replacement number you enter should be for an equivalent machine, not the cheapest one on the market. Our snow blower repair cost calculator applies the same 50% test to a very different machine, and the logic is identical.

A photo of a large stainless steel commercial door-type dishwasher in a busy restaurant kitchen
A $609 repair is well below half of a $4,000 replacement, so repair is the right call.

Frequently asked questions

How much does commercial dishwasher repair cost?

Most commercial dishwasher repairs run $200 to $700 for pump, spray arm or heating element work, plus a $135 to $299 diagnostic fee. Minor repairs run $150 to $350 and major repairs $700 to $1,500. In the worked example, a pump repair totals $609.

Is the diagnostic fee included in the repair price?

Usually not on commercial jobs. The diagnostic fee of $135 to $299 is billed separately and is not credited toward the repair. Some companies roll it into the labor cost if you approve the repair, so ask before the visit. If the fee is credited, enter 0 for the diagnostic fee in the calculator.

When should I replace a commercial dishwasher instead of repairing it?

Use the 50% rule. If a single repair costs more than 50% of the price of a new equivalent unit, get a replacement quote as well. Also replace a unit that is past about 10 years of service with a history of repeat repairs, even when one repair passes the test.

How long does a commercial dishwasher repair take?

Most repairs take 1 to 3 hours. A gasket or spray arm takes about an hour, a pump replacement takes 2 to 3 hours, and a control board replacement can take longer if the part has to be ordered. The diagnostic visit itself usually takes under an hour.

What parts fail most often on a commercial dishwasher?

Drain pumps, wash pumps, spray arms, heating elements, door gaskets and control boards. Pumps and motors are the most common mid-range repairs, and control board failures are the expensive exception that push a bill toward the high end.

This is an estimate for planning. Actual commercial dishwasher repair prices come from local repair companies and vary by machine type, fault, parts availability and location.

Start Calculating Now!

Discover the power of smart tools at KitQuarter.

Explore All Tools