Backyard Outdoor TV Installation Cost Calculator

An outdoor TV quote has five parts, and this calculator prices each one so you can see where the money goes.

1. Enter the TV price in dollars. Enter 0 if you already own the TV.
2. Choose the mount type. Fixed costs $50, tilt costs $85 and full-motion costs $180.
3. Choose Yes or No for a weatherproof enclosure, then enter the enclosure price. The price is ignored when you choose No.
4. Enter the labor charge and the wiring and extras cost.
5. Press Calculate, or press Enter. The total installed cost appears first and large, with the equipment cost, labor cost and wiring cost below, plus a step by step breakdown.

Total installed cost = TV price + mount price + enclosure price + labor + wiring and extras. The TV price is what you pay for the TV itself, and it is 0 when you already own one. The mount price is $50 for a fixed mount, $85 for a tilt mount and $180 for a full-motion mount, which sits inside the published ranges from Angi and DigitalSignage.com. The enclosure price is the cost of a hard weatherproof cabinet, about $400 for a 55 inch TV, and it counts only when you choose Yes. Labor is what the installer charges, and wiring and extras covers cable concealment and small parts.

Equipment cost = TV price + mount price + enclosure price. Equipment share = equipment cost / total installed cost x 100. In the worked example the equipment share is 73.4%, which tells you that the hardware, not the labor, is most of the bill. If the patio itself is still a project, our deck cost calculator prices the deck first, so you can budget the whole backyard in the right order.

A homeowner buys an $800 TV for a covered patio, picks a full-motion mount so the screen can turn away from the afternoon sun, adds a $400 weatherproof enclosure, and is quoted $350 for labor and $150 for wiring and extras.

1. Mount price: full-motion = $180.
2. Equipment cost: $800 + $180 + $400 = $1,380.
3. Labor: $350.
4. Wiring and extras: $150.
5. Total installed cost: $1,380 + $350 + $150 = $1,880.
6. Equipment share: $1,380 / $1,880 x 100 = 73.4%.

As a second check, take a $600 TV with a fixed $50 mount, no enclosure, $250 of labor and $100 of wiring. The equipment cost is $600 + $50 = $650, so the total installed cost is $650 + $250 + $100 = $1,000. The same steps work for any setup, so try your own numbers in the tool above.

The mount type is the easiest saving to find. On the same $800 TV with a $400 enclosure, $350 of labor and $150 of wiring, a fixed mount gives a total of $1,750, a tilt mount gives $1,785 and a full-motion mount gives $1,880. The $130 gap buys the freedom to turn the screen away from glare, which matters most on a patio that faces the afternoon sun.

The TV price moves the total the most, because it is the biggest line. A $400 TV with the same mount, enclosure, labor and wiring totals $1,480, while a $1,500 TV totals $2,580. The enclosure is the next big choice, since skipping it saves the full $400, but only makes sense under a roof where rain never reaches the screen. The wall matters too, because brick, stone, concrete and stucco need anchors, drilling and sealing, which adds $150 to $700. Power is the last surprise, since a new outdoor outlet costs $200 to $900 and is often missing from a mounting quote.

There are two ways to get a TV that survives outside, and the install cost decides between them. The enclosure route uses a regular TV inside a hard weatherproof cabinet. In the worked example that route costs $1,880 installed, with an $800 TV, a $180 mount, a $400 enclosure, $350 of labor and $150 of wiring.

A purpose-built outdoor TV is sealed against rain and dust and bright enough for daylight, so it needs no cabinet. A 55 inch model sells for $1,995 to $3,199 before mount and labor, based on February 2026 street prices. The same install with a $180 mount and $350 of labor costs $2,525 to $3,729 before wiring, which is $645 to $1,849 more than the enclosure route.

Choose the enclosure when you already own a TV, the spot is covered, and the TV comes inside or under a cover in harsh weather. Choose a purpose-built outdoor TV when the spot is in full sun or driving rain, when the TV stays out all year, or when you want a bright picture in daylight without a cabinet door in front of the screen.

Check the power first. A backyard TV needs a weatherproof GFCI outlet near the mount, and a new one costs $200 to $900 installed. Never run an indoor extension cord outside, and hire a licensed electrician for any new circuit, since outdoor wiring must meet the National Electrical Code. Our home generator installation cost calculator prices another job where a licensed electrician is part of the bill.

Check the wall and the mount next. Confirm the mount matches your TV VESA pattern and that its weight rating is above your TV weight, then confirm the wall can hold it, since brick and stucco need proper anchors. Think about glare before the installer drills, because a screen that faces the afternoon sun is hard to watch, and a full-motion mount is the fix when the seating and the sun do not line up. Finally, ask for an itemized quote that lists the TV, the mount, the enclosure, labor and wiring separately, so you can compare it with this calculator before you agree.